Triaxial

This three (3) layer fabric has fibreglass roving laid down parallel in the – 45°, + 45° and 0° or 90° axis. The 0° or 90° axis generally contains approximately 30 % of the fibre content, but is also available with 50 % of fibre content in this direction. Lightweight stitching holds these fibres together and parallel in each layer. This stitching is non-structural.

This fabric gives the builder the ability to control the amount of fibre concentration in the areas requiring it. The 0° or 90° fibres add strength across the hull with the 45° fibres adding additional cross bracing and torsional stability.

Also available in weft direction Triaxial and with 225 g/m² chopped strand mat (CSM) stitched to the top side of the fabric for additional inter-laminar bonding requirements. 

Triaxial
Key Features: Our Range:
Conforms to complex contours and drapes easily Weights: 180 g/m² - 1800 g/m²
Commonly used as a main component of hull and deck laminates Widths: 100mm - 1270mm
Compatible with Epoxy, Vinyl Ester and Polyester resins  
Binder-less Chopped Strand Mat available